> ## Documentation Index > Fetch the complete documentation index at: https://crsdk.app/llms.txt > Use this file to discover all available pages before exploring further. # Move the AF frame > Move the centre of the autofocus frame. Send either absolute coordinates (`x` 0-639, `y` 0-479) or `normalized` 0-1 values — the latter is usually what you want when translating a tap or click on a live view. ## The camera clamps, and does not tell you The usable area is smaller than the full range: it is inset from the edges and varies by model, aspect ratio and AF setting. A request inside 0-639/0-479 is always accepted with `200`, then silently clamped. Measured on an ILCE-7M4 with Tracking Expand Flexible Spot — every corner was requested and every one was pulled inward, symmetrically: | Requested | Landed | |---|---| | `0, 0` | `65, 61` | | `639, 0` | `574, 61` | | `639, 479` | `574, 418` | | `0, 479` | `65, 418` | | `320, 240` | `320, 240` | That is a usable area of x `65-574`, y `61-418` — the middle 80% x 74% of the coordinate space. Treat those numbers as illustrative, not a contract: a different body, aspect ratio or AF area will inset differently. A write is also ignored outright when the focus area has no movable box. **Always follow up with `getAFAreaPosition` to see where the frame actually is** rather than assuming the requested value took. Requires priority key `pc-remote`. ## OpenAPI ````yaml /openapi.yaml put /api/cameras/{cameraId}/af-area-position openapi: 3.1.0 info: title: Alpha Camera REST API version: 3.0.0 description: > RESTful control for Sony cameras — shooting, settings, live view with OSD overlay, focus control, and file transfer through a clean HTTP interface. Built on the Sony Camera Remote SDK. Supports USB and network camera connections with multi-camera simultaneous operation. ## Connection Modes | Mode | Description | |------|-------------| | `remote` | Full camera control: shooting, settings, live view. Auto-transfer images to host PC. | | `remote-transfer` | Camera control + explicit SD card file access. Most capable mode. | | `contents` | SD card file access only. No shooting or settings control. | ## Quick Start 1. `GET /api/cameras` — discover cameras 2. `POST /api/cameras/{id}/connection` — connect 3. `PUT /api/cameras/{id}/priority-key` — set to `pc-remote` 4. `PUT /api/cameras/{id}/properties/{name}` — configure settings 5. `POST /api/cameras/{id}/actions/af-shutter` — shoot 6. `DELETE /api/cameras/{id}/connection` — disconnect ## Priority Key Requirement The camera's priority key **must** be set to `pc-remote` before it accepts any remote property changes or shooting commands. license: name: Proprietary contact: name: Camera Remote SDK url: https://github.com/ocjlee888/camera-remote-sdk-project servers: - url: http://{host}:{port} description: | Local camera server. The server binary runs on the host that has the camera physically connected (USB or network). Defaults to `http://localhost:8080`; override `host` and `port` when the server runs on a different machine (e.g. a Raspberry Pi next to the camera). variables: host: default: localhost description: Host running the camera server binary port: default: '8080' description: Port the camera server is listening on security: [] tags: - name: Connection description: Camera discovery, connection, and disconnection - name: Properties description: Read and write camera properties (ISO, aperture, shutter speed, etc.) - name: Actions description: Shooting commands and motor control (shutter, zoom, focus) - name: Live View description: Live view streaming and OSD overlay control - name: Events description: Server-Sent Events for real-time camera callbacks - name: SD Card description: SD card file browsing and download - name: Settings description: Save path configuration and camera settings file management - name: Server description: Server health, status, and log retrieval paths: /api/cameras/{cameraId}/af-area-position: put: tags: - Actions summary: Move the AF frame description: > Move the centre of the autofocus frame. Send either absolute coordinates (`x` 0-639, `y` 0-479) or `normalized` 0-1 values — the latter is usually what you want when translating a tap or click on a live view. ## The camera clamps, and does not tell you The usable area is smaller than the full range: it is inset from the edges and varies by model, aspect ratio and AF setting. A request inside 0-639/0-479 is always accepted with `200`, then silently clamped. Measured on an ILCE-7M4 with Tracking Expand Flexible Spot — every corner was requested and every one was pulled inward, symmetrically: | Requested | Landed | |---|---| | `0, 0` | `65, 61` | | `639, 0` | `574, 61` | | `639, 479` | `574, 418` | | `0, 479` | `65, 418` | | `320, 240` | `320, 240` | That is a usable area of x `65-574`, y `61-418` — the middle 80% x 74% of the coordinate space. Treat those numbers as illustrative, not a contract: a different body, aspect ratio or AF area will inset differently. A write is also ignored outright when the focus area has no movable box. **Always follow up with `getAFAreaPosition` to see where the frame actually is** rather than assuming the requested value took. Requires priority key `pc-remote`. operationId: setAFAreaPosition parameters: - $ref: '#/components/parameters/cameraId' requestBody: required: true content: application/json: schema: $ref: '#/components/schemas/AFAreaPositionRequest' responses: '200': description: > Accepted by the camera. The frame may have been clamped — confirm with `getAFAreaPosition`. content: application/json: schema: $ref: '#/components/schemas/CameraResponse' '400': description: | Missing or malformed body, coordinates out of range, or the camera rejected the write. content: application/json: schema: $ref: '#/components/schemas/ErrorResponse' '404': description: Camera not found content: application/json: schema: $ref: '#/components/schemas/ErrorResponse' components: parameters: cameraId: name: cameraId in: path required: true description: Camera identifier (e.g. `D10F60149B0C`) schema: type: string schemas: AFAreaPositionRequest: type: object description: > Supply either `x` and `y`, or a `normalized` object. If both are present, `normalized` wins. properties: x: type: integer minimum: 0 maximum: 639 description: Frame centre X in the camera's AF coordinate space. 'y': type: integer minimum: 0 maximum: 479 description: Frame centre Y in the camera's AF coordinate space. normalized: type: object description: > Frame centre as 0-1 fractions of the live view — use this for a tap or click position without converting to the SDK's coordinate space. properties: x: type: number minimum: 0 maximum: 1 'y': type: number minimum: 0 maximum: 1 CameraResponse: type: object description: | Generic envelope returned by most camera operations. The shape of `data` varies per endpoint — most operations return an empty or null `data`; operations that return structured data document a specific shape. SDK-generated types can treat `data` as an opaque map for generic endpoints. required: - success properties: success: type: boolean message: type: string camera: $ref: '#/components/schemas/CameraSummary' data: type: object additionalProperties: true ErrorResponse: type: object description: | Standard non-2xx response envelope. The API does not currently expose a stable machine-readable error code in the JSON body, so clients should branch on HTTP status first and then inspect `message` for the human-readable reason. example: success: false message: Camera not connected camera: connected: false model: ILCE-7M4 id: D06CE05E3323 required: - success - message properties: success: type: boolean const: false example: false message: type: string example: Camera not connected camera: $ref: '#/components/schemas/CameraSummary' CameraSummary: type: object description: Camera info embedded in API responses properties: connected: type: boolean example: false model: type: string example: ILCE-7M4 id: type: string example: D06CE05E3323 ````